H1 to H7 and What They Mean for Cross-Border Trade

Every import into the EU, and most into the UK, is filed against a two-character code. H1, H6, H7. Pick the wrong one and you pay too much, clear too slowly, or hand customs a reason to stop your goods at the border.

These codes set how much data you send, which relief you can claim and who’s allowed to file. Since 1 July 2026 they also decide your duty bill on low-value parcels, and since 1 November 2026 they set the handling fee on every B2C e-commerce import. These seemingly arcane data sets have been treated as back-office issues by operations teams for years. That view will now cost money.

What a data set is

A data set is defined in Annex B of the Union Customs Code (UCC) Delegated Regulation (EU) 2015/2446.

A full H1 import declaration asks for dozens of data elements. A postal H6 or an e-commerce H7 asks for far fewer, because the goods are cheap, high-volume and low-risk. The less data you send, the more conditions you have to meet to qualify.

The UK kept the same structure after Brexit. HMRC calls these “declaration categories” in the Customs Declaration Service (CDS) and lists them in Appendix 21.

H1 to H7, one by one

Seven H categories cover imports, plus the I1 simplified declaration. Here’s what each one does.

Data setWhat it’s forWho typically filesData load
H1Release for free circulation, plus end-use and specific-use declarationsImporters, brokersFull
H2Entry into customs warehousingWarehouse operators, importersFull
H3Temporary admission, e.g. exhibition goods or equipmentImporters, brokersFull
H4Inward processing: import, transform, re-exportManufacturersFull
H5Goods from special fiscal territories, e.g. the Canary Islands, or customs-union partnersImporters, brokersFull
H6Postal consignments released for free circulationPostal operators onlyReduced
H7Low-value consignments of €150 or less, built for e-commerceCarriers, marketplaces, IOSS sellers, brokersSuper-reduced
I1Simplified import declaration, completed later by a supplementary declarationAuthorised tradersReduced

H1 is the default. If the goods enter free circulation and don’t qualify for anything lighter, you file H1. It carries the full commercial picture: classification, origin, customs value, preference claims and licenses.

H2, H3 and H4 are the special procedures. They suspend or defer duty while goods sit in a warehouse, visit temporarily or get processed for re-export. Each needs an authorisation, and each creates an obligation to discharge the procedure later. A missed discharge brings back the duty you deferred.

H5 covers fiscal edge cases. Goods from territories inside the EU customs territory but outside its VAT area, or from customs-union partners, still need a declaration for the tax side.

H6 is reserved for postal operators. Under Article 144 of the Delegated Regulation, a postal operator can file the reduced H6 data set for goods worth up to €1,000, provided they aren’t subject to prohibitions or restrictions. Couriers and express carriers can’t use it.

H7 arrived on 1 July 2021 with the EU e-commerce VAT package and the Import One Stop Shop (IOSS). It’s a super-reduced data set for consignments with an intrinsic value of €150 or less that qualified for duty relief under Regulation (EC) No 1186/2009. Its purpose was scale: clearing parcels at e-commerce volumes without a full declaration for each one.

I1 lets authorised traders release goods on a minimal data set and complete the picture with a supplementary declaration. HMRC splits it into I1 C&F for regular users and I1 B&E for occasional use.

H7 after 1 July 2026: the €150 relief is gone

The EU abolished customs duty relief for goods worth €150 or less on 1 July 2026. Council Regulation (EU) 2026/382 replaced it with a temporary flat duty of €3.

  • Charged per line. The €3 applies to each item line on the declaration. Five identical T-shirts under one commodity code cost €3. A T-shirt, headphones and cosmetics under three codes cost €9.
  • B2C distance sales. It hits goods shipped from outside the EU direct to EU consumers. Goods claiming preferential origin under a trade agreement are excluded, with conditions.
  • IOSS doesn’t exempt you. The duty applies whether VAT goes through IOSS, the special arrangements or standard import VAT.
  • The declarant pays. The seller, importer, IOSS holder or representative owes the duty.
  • Product identifiers. Voluntary from 1 July 2026, mandatory for every product in a distance sale, whatever its value, from 1 November 2026.
  • Temporary. The flat rate runs until 1 July 2028, when the EU Customs Data Hub is due to bring in normal duty rates by classification.

The consequence for H7 is direct. The data set was designed around a duty exemption, and that exemption no longer exists. The H7 framework needs technical changes to calculate the €3 duty. Our reasoned position: classification on an H7 now carries a direct cost, because every extra commodity code adds €3. Lazy descriptions such as “accessories” also invite more customs challenges.

The Union Handling Fee: another €2 a line from 1 November 2026

On 1 November 2026 the EU added a second per-line charge. The Union Handling Fee (UHF) is €2 for each distinct item line on an import declaration covering B2C e-commerce goods. Article 20 of Regulation (EU) 2026/2108 creates it, and Commission Delegated Regulation (EU) 2026/2152 sets out the detail. Its stated purpose is to fund the customs work that parcel volumes generate: data checks, risk analysis, infrastructure and controls.

  • No value threshold. The fee applies to B2C distance sales at €40 or €4,000. It reaches H1 lines as well as H7.
  • It stacks on the duty. At €150 or less, each line pays the €3 duty plus the €2 UHF, so €5 a line before VAT. Above €150, normal duty rates apply and the UHF still sits on top.
  • Same counting rule. Identical items under one commodity code count as one line. A parcel with three distinct items pays €6 in UHF.
  • Declared through TARIC. Additional reference code Y126 triggers the measure, and a new tax type, F00, collects it. That’s how Irish Revenue has specified it; check each member state’s technical guidance before you build.
  • No refunds, and VAT on top. The fee is non-refundable, even on faulty or returned goods, and it forms part of the VAT base.
  • Gifts are out. Gifts sent between private individuals fall outside the fee.
  • Permanent. The €3 duty ends in July 2028. The UHF has no end date.

The fee is aimed at the platforms, marketplaces and sellers that bring parcels into the EU, not at the consumer.

Our reasoned position: the UHF removes the last commercial argument for loose data on low-value parcels. A five-line H7 parcel now carries €25 in fixed charges before VAT, and every unnecessary commodity code costs €5. Because the fee follows B2C goods above €150 too, moving a consignment from H7 to H1 doesn’t escape a per-line charge. Line count is now a cost line in its own right, on every data set an e-commerce seller files.

The UK runs the same codes on a different clock

HMRC’s CDS uses the same naming, with a few differences. Appendix 21, updated August 2026, lists H1 to H5, I1 (C&F and B&E) and H7. It doesn’t list an H6 category.

The bigger gap is the low-value threshold. The UK still offers customs duty relief on goods worth £135 or less. At Autumn Budget 2025 the Chancellor said the relief would go “from March 2029 at the latest”. HM Treasury consulted on the replacement regime, covering data, tariff treatment, a possible fee and VAT collection. It published its response on 13 July 2026.

That leaves cross-border sellers running two low-value regimes at once. The EU charges €3 in duty plus a €2 handling fee a line today. The UK grants relief up to £135 until it brings in its own system. Our reasoned position: sellers serving both markets should design their classification and data flows for the stricter regime now, not rebuild twice.

Getting the data right

H6 and H7 cut the number of data elements, but the customs checksremain teh same. On an H7 after July 2026, three inputs drive the outcome:

  1. Classification. The commodity code sets the line count, and the line count sets the €5 bill, €3 in duty and €2 in UHF. When normal rates return in 2028, it sets the duty rate too.
  2. Valuation. Intrinsic value decides whether a consignment qualifies for H7 at all. Get it wrong and the parcel belongs on an H1.
  3. Prohibitions and restrictions. H6 excludes restricted goods outright. Dual-use and controlled items need screening before anyone picks a data set.

Hurricane Commerce builds for exactly this problem. Classification v2 and Zephyr assign HS codes at scale, the Duty and Tax Calculator handles valuation methods globally, and Prohibited and Restricted screening covers dual-use goods. Global Assure, the Global Trade Ecosystem and the Kona API carry that data into the declaration, whichever column it’s filed against.

The code at the top of your declaration is a commercial decision. Treat it like one.

To find out more about how Hurricane GTE can solve these data set headaches for you click here, or book a demo by filling out the form below.